100FT 12V Pump Patio Water Mister Mist Nozzle Misting Cooling System Fan Cooler

Description

Package A Includes:
1 x Micro Diaphragm Pump
1 x Power supply
1 x 12M misting system
2 x White female connector
16 x Mist nozzles
1 x End plug
1 x Inlet filter head
40 Saddle clamps
40 cable ties
1Roll x Seal tape
Main Features:
Perfect for cooling your outdoor living areas. Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog. No air assistance is required, the system is simple, the spray point is fine, the atomization is sufficient, energy and water saving, low cost and fine effect.
Scope of application: Wetting and descaling, air humidification, chemical treatments, chemical spraying, liquid spraying, tobacco leaf humidification, tablet coating, flue gas evaporative cooling, sterilization, component cooling, fruit spray Wax, tile glazing, plant humidification, salt spray test, artificial fog, humidification in other places, etc.
Description:
Sprayer Type: Pump
Type: Sprayers
Material: Plastic
Plastic Type: ABS
Model Number: LP-V03
Product Name: 12V water pump misting kit
Nozzle Size: Default 0.3mm
Function: Humidity, Stop dust, Cooling, Landscaping
Application: Cooling, Humidification and Garden Micro irrigation
Hose Material: Food Grade PE
Tubing size: 1/4''(6.35mm)
Pump Liter: 5L/min
Power: 12V 60W
Structure: Diaphragm Pump
Working Pressure: 0.8Mpa
Installation steps:
1.Take the 3M water hose and water inlet filter and put the filter into the water tank totaly .
2.Fit Misting Nozzles and end plug with Nozzle Fittings.
3.Take the black pump,Connecting one side with 3M water inlet and another side with 12M misting system.
4.Connect power adapter with pump and turn on the power to operate the system for 1 Minute to discharge the air in.
5.Check the whole system carefully to ensure there is no water leakage after the system start to work.
6.Fix the misting lines by the cable ties and saddie clamps provided.
7.Turn on the power and then enjoy the misting cooling system.
Note:Water leakage proof tape is recommended if found anywhere with water leaking.
B=30M Micro
Drip Watering System
Feature:
- Drip irrigation is an efficient, easy to install permanent irrigation system. It works by applying water slowly, directly to the soil and plants. Therefore, the plants can absorb nutrient and moisture directly with this useful tools. Buy it and you will see a prosperous scene !
- This set is perfect for patio, atrium and greenhouse plants
- It can be adjusted to accommodate troughs, pots, hanging baskets and garden beds alike.
- It can automatic irrigation when your tap tight thread adapter and open water
- Watering the garden, potted plants, shrubs and trees is no longer a chore, it is fun
- Irrigation Methods: Spray/Dripping
Specification:
The micro-injector can be adjusted to change the size of the fog and can even be turned off.
No need to dig or do pipe work. Cut the pipe itself and use a fixed, more suitable spindle to adjust the size to suit local conditions.
Weight: about 962g
Hose Length:30( 2*15m )meters
Hose Material: PVC
-This micro irrigation kit includes PVC tube, faucet connector, nozzle, T-connector, support stakes, etc. convenient for you to use
Package Content:
1 x Adjustable Drip Irrigation Set ( 30m(2*15m) Set)
Note:
- Please allow minor errors due to manual measurement. Thanks for your understanding.
- Monitors are not calibrated same, item colour displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
On Jul-09-21 at 20:38:11 PDT, seller added the following information: